Finish

Canvas grip

Strong grip that sinks into heavy fibres for a rugged, canvas-like feel.

Canvas grip

Canvas grip transfers have a firmer bite and textured hand, anchoring the print deep in tote bag and canvas weaves. This finish stands up to tough handling, making it ideal for bags, aprons or workwear patches.

A finish that blends into heavy fabrics

Canvas grip is all about a solid, tactile finish that feels right at home on thick cotton totes, canvas shopping bags and workwear aprons. The print bonds tightly with the fabric ridges, so there’s less lift at the edges and a confident hold, even after rough use. Expect a textured, slightly raised result with noticeable grip, no soft T-shirt feel here.

Shops choose this look for items that need durability and a more rugged appearance. It's especially popular with tote bag makers, promotional gear printers and anyone decorating industrial cotton or canvas where a soft-hand finish would get lost in the weave.

How to achieve the canvas grip transfer

Start with a standard or cold-peel PET film that offers solid registration and holds powder well. The key is to use a coarser, workwear-grade TPU powder, these larger grains melt deeper into the fabric structure, giving more bite and a firmer, textured result.

After printing and powdering, cure the adhesive for 3 to 5 minutes at 140 to 150 degrees C under a hovered press or in a tunnel oven. Press onto the pre-pressed garment at around 150 to 165 degrees C for 12 to 15 seconds at medium-firm pressure. Let the transfer cool fully for a cold peel, then peel low and slow.

See below for the critical steps.

  • Use coarser or workwear-grade TPU powder for extra melt-in
  • Select a film made for cold peel for best fibre grip
  • Cure for at least 3 minutes to ensure full powder melt
  • Apply firm, even press pressure to work powder into the weave
  • Cold peel only after the transfer is cool to the touch

Aftercare and what to check

With canvas grip, you’re aiming for a wash-tough finish that keeps edges locked down. After the first wash, check for any edge lift or hard cracks, these can show if the powder didn’t fully melt or the press wasn’t hot enough to sink the transfer into the weave.

Some stiffening is natural on canvas and will soften slightly with wear. If you run into wash-off or patches coming loose, increase your press time or check for cold spots on your heat press bed with an infrared thermometer.

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.