Finish
High-vis safe
DTF Ink helps you create DTF transfers that keep safety gear compliant and comfortable, blending neatly with reflective tape on high-vis workwear.

This finish is smooth, low-gloss and flexible, avoiding glare or edges that catch hands or snag straps. Transfers lie flat, with a soft enough feel to sit on utility shirts, bibs or jackets all shift long.
What a high-vis safe transfer looks and feels like
On high-vis garments, this finish looks tidy, with no shiny halo or sticky edges. The print sits politely beside reflective tape, so the tape remains fully exposed and functional. Colours are solid but not overly glossy, avoiding distractions or interfering with visibility bands. The edge profile is smooth and thin, helping the transfer blend in with the base fabric, even on light ripstop or polycotton workwear.
Touch-wise, the finish is soft, thin and flexible. It does not catch on gloves, belts or harnesses. This makes it ideal for company logos, badges or identification blocks on safety vests, utility shirts, site jackets and school patrol bibs where compliance and comfort matter.
How to achieve a stackable, low-profile transfer for workwear
Start with a matte or double-matte PET film, these reduce glare and make the edge of the transfer less visible. Choose a fine or soft-hand TPU powder, which creates a flexible bond and minimises the bulky edge that can build up around thick tapes or seams.
Cure the powder at a steady 110 to 120 degrees Celsius for two to three minutes until the surface is glossy with a subtle orange-peel look. Press onto the garment at 140 to 150 degrees Celsius for 10 to 12 seconds, medium-firm pressure, with a quick pre-press to flatten the area. Most high-vis items are polyester or polycotton, so cold peel is safest, let the transfer cool before removing the film to avoid any lift at the tape edge.
Finish with a short five-second press through a Teflon sheet to embed the edge and help the transfer sit flatter on seams and next to reflective tape.
- Matte or double-matte PET film
- Fine or soft-hand TPU powder
- 110 to 120 °C cure, 2 to 3 minutes
- Press at 140 to 150 °C, 10 to 12 seconds, cold peel
- Finish with Teflon for five seconds
What to check after washing and heavy use
After several washes, check for any lifting at the transfer edge, especially where it meets reflectives or seams. The right powder and a well-pressed edge prevent most issues, but work shirts and bibs take a beating in industrial laundries and on site.
Look for cracking or colour fade after a few cycles at the care label temperature. If you see the transfer edge lifting, try a slightly higher press temperature or a longer finishing press next time. Regular inspection lets you tweak your method so your finished stack keeps passing site checks.
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

