Finish
Kids gentle
A smooth, gentle DTF transfer finish for kidswear starts with the right soft-hand powder and careful, lower-intensity curing.

Kids gentle transfers are all about comfort: the print feels light, flexible and smooth, perfect for little ones’ skin. This finish is best for baby and toddler tees, onesies, rompers and soft playwear where feel counts.
Kids gentle finish means soft, flexible and smooth on skin
A kids gentle DTF finish looks and feels much finer and smoother than standard prints, with almost no edge lift or stiffness. You can run your hand over the transfer and barely feel the print ridges. The result is a soft, flexible layer that moves with lightweight cotton or cotton-rich fabric, and never feels plasticky or scratchy against the skin.
Shops and brands use this finish for infant and toddler garments, pre-school and junior tees, or any wearables for sensitive skin. Boutique babywear, school play kits and sleepwear also benefit from the reduced bulk and gentle texture.
How to get a gentle finish for kidswear prints
Start with a fine, soft-hand TPU powder from our range. Finer grades melt into a thin adhesive layer, perfect for delicate feels. Use PET film with a double-matte coating for reliable release and minimal static, A3 sheets or 30 cm rolls suit most kids’ runs.
Cure powder at a lower temperature and for a shorter time: try 100 to 115 degrees C for 2 to 2.5 minutes in the oven. If you’re using a heat press for powder cure, hover with a 5 mm gap at 140 degrees C for 3 minutes. Avoid over-curing, as this can stiffen the transfer.
For pressing, pre-press the garment for 2 seconds to flatten, then transfer at 150 degrees C for 10 to 12 seconds with medium pressure. Most soft powder jobs peel best cold, let the transfer cool completely before peeling slowly. Finish with a quick 5-second press through a Teflon sheet for extra smoothness.
- Fine soft-hand powder for less bulk
- Double-matte PET film for easy release
- Lower, shorter cure to keep prints flexible
- Cold peel for the smoothest finish
- Quick finishing press through Teflon
What to check after washing and real-world wear
After a gentle finish, wash-test a sample inside out at the care label’s temperature. Look for any edge lift, patchiness or cracks, these usually point to under-cured powder or too little pressure at press. The print should stay flat, smooth and flexible, even after repeated washes and tumble dry cycles.
With soft prints on high-stretch babywear, check for fine cracking after heavy pulls or stress. If you see colour fading or flaking, revisit your cure and powder choice for better bonding. Avoid promising a set number of washes, focus on real, daily use checks.
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

