Finish
Opaque dark
A bold, opaque white underbase built for rich navy and black fabrics makes colours and whites pop, even on the toughest backgrounds.

Thick white ink brings a strong, standout print on dark garments that blocks out show-through. Ideal for graphic tees, varsity hoodies and workwear where opacity matters most.
What an opaque dark transfer looks and feels like
This finish stacks a punchy white underbase under your top colours, giving you a solid, striking print on navy, charcoal or black. The result is a slightly heavier hand-feel than standard DTF: you’ll notice a bit more structure when you rub your fingers over the print, but there’s still good flex and give for all-day comfort.
Designs come out crisp, bright and fully opaque, with no hint of the garment showing through the image. This makes it a top choice for sports strips, branded uniforms, festival merch and boutique styles where you want art that stands out on dark fabric.
How to build a heavy white underbase for darks
Go for double-matte PET film, since it handles stacked ink layers and controls dot gain. Pair it with a fine or medium-grade hot-melt powder for enough grip without hardening the transfer.
Key starting steps for this finish:
- Print at your rip’s recommended maximum white underbase for darks
- Agitate and check your white ink every shift, and always run a nozzle check for solid coverage
- Cure powder fully: oven 2 to 3 minutes at 110 to 120 degrees C, or hover-press for 3 to 5 minutes at 145 degrees C with a 5 mm gap
- Press at 155 to 165 degrees C for 12 to 15 seconds, medium-firm pressure; most hot peel films can be peeled hot for speed, or cool fully for best edge definition
- Finish with a 7 to 10 second repress through parchment or Teflon for smoother feel
Checking durability after washing and wearing
You want to see the print holding sharp edges and full opacity after a few washes, with no patches or cracks. Heavy white layers can be more prone to thick edges lifting if under-cured, or to feeling stiff if overcured.
Test on your actual garment and wash inside out at the care label setting. If corners start to catch or fade, check that you’re not over-powdering or under-pressing, and confirm the white isn’t settling in the bottle or clogging nozzles. Adjust your cure or pressure until your prints hold up through wear.
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

