Finish
Stretch flex
A stretch flex DTF transfer finish bends and rebounds with the fabric, ideal for garments that need plenty of give.

Stretch flex stacks are tuned for soft hand-feel and reliable stretch, so prints move with the garment without cracking or stiffening. This finish is geared for sports kit, leggings, lycra blends and any activewear that gets pulled and flexed in daily use.
What a stretch flex finish looks and feels like and when to use it
A stretch flex DTF transfer blends into the garment with a low-profile, slightly matte look, and feels soft and smooth under the hand. When you stretch the fabric, the print elongates with it, snapping back without visible cracks or distortion. This finish stands out on leggings, running tops, cycling vests and dancewear, any gear that takes a beating or needs to stay comfortable when pulled tight. It is also a sound option for compression shirts, sport bras, team kit and kids’ stretchwear.
How to achieve stretch flex with your DTF setup
For stretch, start with a double-matte PET film that advertises a flexible finish. Use a fine or soft-hand TPU powder as these grades let the transfer breathe and flex more easily. Cure the powder steadily at 100 to 120 degrees C in an oven, or hover under an open press as close as your setup allows without touching, until you see a consistent glossy orange-peel look.
When pressing onto the garment, set your press at 140 to 155 degrees C for 10 to 13 seconds at medium pressure. Give stretch knits a short warm-up press of 2 to 5 seconds first, so trapped damp steams off before the transfer goes down. Hot peel films generally feel softer but check your film's spec sheet. Finish with a 5 to 8 second press through a Teflon sheet to improve stretch and wash resistance.
- Choose double-matte or soft-peel PET film for best flexibility
- Use fine or soft-hand TPU powder for a lighter, stretchier feel
- Cure at 100 to 120 degrees C until glossy, not tacky
- Press at 140 to 155 degrees C for 10 to 13 seconds, medium pressure
- Hot peel for softer hand, but always check film instructions
What to check for after washing and repeated wear
After washing and wearing, stretch flex prints should rebound without splitting or flaking along the edges. For best results, test a sample by stretching the print side to side and checking for micro-cracking. If you see white cracks or lifting, double-check your cure and film choice, and try a finer powder or a lower press temperature for the next batch. If the print stiffens after the first wash, shorten the finishing press or use a lighter powder.
Heavy heat or over-curing can make even the best flex transfer go stiff or brittle, so always check your press temperature with an infrared thermometer and cure just until the powder glosses. Wash test every new fabric and print combination to catch issues before running a full order.
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

