Pressed sample
Badge type
This badge transfer sample shows how fine staff names and crisp logos can be achieved with DTF on polycotton workwear.

The DTF Ink team pressed a small, multi-name badge sample onto a classic work shirt, holding sharp lines and neat colour blocks. Staff names under 6 millimetres high stayed readable and clean after pressing and washing.
What this pressed badge sample demonstrates
This sample features a rectangular badge with a main logo, a solid colour background and individual staff names, each sized for left chest placement on a polycotton shirt. The badge includes both thick and thin elements, with staff names set in a small sans-serif font, showing the capability of DTF to handle fine details and keep edges sharp, even on a textured workwear weave.
The badge was pressed onto a navy polycotton shirt, a common garment for uniforms and workwear, where wear resistance and wash durability are important. The design was chosen to test visibility and clarity of the smallest letters, and how well the finished transfer sits on a lightly grained fabric.
How the badge transfer was produced and applied
To prepare the badge, we printed onto double-matte coated PET film using our own DTF inks, with the white underbase run at the standard 720 dpi. Fine TPU hot-melt powder was applied by hand and the excess shaken off thoroughly. Curing was done in an oven at 120 degrees C for about 2 and a half minutes, checked for a consistent glossy finish and fine orange-peel texture.
The garment was pre-pressed for 3 seconds at 150 degrees C to flatten the chest area and drive out moisture. The badge transfer was then pressed at 155 degrees C for 12 seconds at medium-firm pressure, using cold peel film: this means the transfer was left to cool for over a minute before peeling steadily from one corner. A short 7-second finishing press was done through a Teflon sheet to improve wash resistance and soften the feel.
What to check for sharp small text and badges
For similar badges, make sure the smallest letters are at least 5 to 6 millimetres high and use a clean sans-serif font. Keep the white ink well-agitated before printing and always run a nozzle check, as weak white will blur tiny text. Choose a fine or soft-hand powder for better detail hold, and shake it off fully to avoid grainy edges.
Press at the lowest temperature that fully fuses the transfer but avoids scorching the fabric. Always let cold peel film cool completely before peeling, especially on polycotton. After pressing, gently test the badge edges by bending and flexing the fabric to make sure no corners lift.
- Print fine text at 720 dpi or higher
- Use fresh, daily-agitated white ink
- Apply powder evenly, avoid clumps
- Test cold peel timing and edge lift
- Finish with a short Teflon press
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

