Pressed sample

Event drop

Festival merch printing on DTF sheet film gives fast, sharp results on custom event drops.

Event drop

This sample is a bold one-colour event logo pressed onto a unisex cotton tee using DTF Ink A3 sheet film. It shows how crisp edges and high-opacity white are possible, even on midweight dark cotton, with the right ink and powder technique.

How the sample was created for a festival merch drop

For this run, our team printed a batch of 100% cotton ring-spun tees with a striking single-colour event drop logo, using DTF Ink's hot-peel A3 PET sheet film and our fine soft-hand TPU powder. The design was printed with a solid white underbase and a single CMYK colour layer for maximum pop on black fabric. After printing, we applied powder by hand in a powdering tray, shook off the extra, then cured transfers under a hovering press for about 4 minutes at 145 degrees Celsius, 6 millimetres off the surface.

Tees were pre-pressed for 3 seconds to flatten seams and flash off any moisture. Transfers were pressed at 160 degrees Celsius for 12 seconds at medium-firm pressure. The hot-peel film was peeled away smoothly in under five seconds. We finished with a quick 8-second repress through a Teflon sheet for wash durability and soft handle.

  • A3 hot-peel PET sheet film
  • Fine soft-hand TPU powder
  • 160 degrees Celsius, 12 seconds, hot peel
  • 8-second finishing press through Teflon

What the pressed result shows on festival ready merch

This sample demonstrates solid, consistent white coverage and crisp lines, ideal for high-contrast event and festival branding. The soft-hand powder keeps the print flexible and wearable, which matters for festival tees that see a lot of movement and heat. The hot-peel film delivers a fast peel and clear separation, avoiding ghosting and powder haze.

Edges are sharp, with no visible bleeding or powder residue, and the finish is smooth with minimal texture, a good match for current streetwear and merch requirements.

  • High-opacity white on black cotton
  • No powdery edge or halo
  • Smooth, flexible finish
  • Good registration on seams and hems

What to check for similar results on your own festival transfers

If you are aiming for this result, always agitate your white ink before printing and run a nozzle check. Use a fine soft-hand powder for detail and a smooth finish. Cure the powder fully so it goes glossy and slightly textured, not tacky. Take care when hot peeling, a fast, even motion right after pressing gives the cleanest release.

Keep your A3 sheets sealed and flat, especially in dry Highveld air, to prevent static and dust. Use a Teflon sheet for the finishing press to keep the print supple and durable on festival gear.

  • Agitate white ink and check nozzles each shift
  • Powder in a tray and shake off all excess
  • Cure with a press gap for even heating
  • Peel hot and steady for sharp lines

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.