Pressed sample
Export pack
This Export pack sample shows a sharp full-colour DTF transfer on a midweight cotton tee, finished with a DTF Ink wash checkcard insert for durability testing.

The sample demonstrates reliable DTF adhesion and vivid colour on export-grade combed cotton. A wash checkcard in the carton lets you test wash fastness for your own workflow.
Export sample on cotton shows vivid print and firm bond
The export pack sample features a detailed multi-colour logo pressed onto a high-quality white combed cotton T-shirt. The print is crisp, colours are rich, and the white underbase gives strong opacity. The sample comes with a wash checkcard cut from the same print run, so you can run your own wash tests or demo to clients.
This demonstrates how DTF transfers hold up on export-grade garments, where expectations for feel and longevity are high. The transfer sits flush, with a smooth hand and no obvious film edge.
How the transfer was made with typical DTF Ink settings
We used DTF Ink CMYK plus white DTF ink on double-matte cold-peel PET film. Fine-grade TPU powder was applied and cured in a tunnel oven at 110 degrees C for 3 minutes, aiming for an even orange-peel gloss. The garment was pre-pressed for 5 seconds, then pressed at 160 degrees C for 12 seconds at medium-firm pressure. After full cooling, the film was peeled low and slow, then finished for 7 seconds under a Teflon sheet.
The checkcard was cut from the same transfer, pressed with identical heat and pressure, so you see exactly what your clients will get. Print room humidity was kept around 55 percent to prevent static and nozzle drying.
- Cold-peel double-matte PET film
- Fine soft-hand TPU powder
- Cure: 110 °C for 3 minutes
- Press: 160 °C for 12 seconds
- Peel cold, finish with Teflon
What to do for reliable results on your own export garments
If you want the same bright finish and durability, store your PET film flat and sealed, and check that your white ink is well-agitated before printing. Use a fine powder for soft feel on cotton. Keep your curing temperature stable and check the oven with a thermometer, under-cured powder will wash off, especially on export-grade combed cotton.
Each export tee got a brief warm-up press to drive off carton damp and lay the side seams flat. Use a medium-firm press and let the transfer cool completely before peeling. Always finish with a short press through Teflon or parchment. For wash testing, cut a small sample from the transfer and wash inside out at the care label temperature to check for edge lift or cracking.
- Keep white ink well-mixed before each shift
- Store film and powder dry and out of sun
- Check cure with a test peel before large runs
- Finish with Teflon for smooth feel
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

