Pressed sample
Hoodie block
This hoodie sample shows a large DTF chest block designed to test film fold resistance and press consistency on heavy brushed fleece.

We pressed a full-front solid block on a heavyweight hoodie, then folded and stacked it to check for cracking or ghosting. This test is useful for school, workwear and merch clients who need big, bold prints that last.
What’s on the garment and why we pressed it this way
This sample is a classic pullover hoodie in deep navy, pressed with a single solid DTF block right across the chest. The graphic is intentionally simple: just a bold rectangle, edge-to-edge, to push both the ink and adhesive to their limits. Hoodies like this are standard for schools, clubs, and staff kit, where prints face repeated folding and friction.
The aim was to see how a large, solid area would handle creasing, folding, and being packed in stacks, a real challenge for DTF compared to small logos or text. It’s a good reference for anyone wanting confidence in block printing for uniforms or varsity hoodies.
How we made this transfer: film, powder, and press settings
Our start point: heavyweight double-matte PET cold-peel film in A3, fine soft-hand hot-melt powder, and full CMYK plus white underbase. The hoodie was pre-pressed for 5 seconds to flatten seams and remove moisture.
We cured the powdered film for 3 minutes in the tunnel at 120 degrees C, checking for an even, glossy orange-peel look. Pressed to the garment at 155 degrees C for 15 seconds, medium-firm pressure, then allowed to cool completely before peeling. Finished with an extra 8-second press through a Teflon sheet for improved durability.
- Double-matte cold-peel film
- Fine soft-hand powder for smooth feel
- Pre-press to flatten thick fleece
- Cure at 120 degrees C, 3 minutes
- Press at 155 degrees C, 15 seconds, cool peel
What to check if you want solid blocks to last
For big prints like this, be extra careful on preparation and press technique. Heavy fleece holds moisture, so pre-press properly and don’t rush. Watch for cold spots on the heat press platen, especially if you’re working near the edges with large transfers.
After pressing, let the block cool fully before peeling to avoid lifting corners. Fold and crease the finished hoodie to check for cracks or lines. If you see issues, try a longer or slightly hotter final press through a Teflon sheet and always re-test after you change batches of film or powder.
- Pre-press thick garments to drive out moisture
- Test for cold spots with an infrared thermometer
- Let transfers cool fully before peeling
- Check for cracks by folding the printed area
- Re-test settings any time consumables change
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

