Pressed sample

Kids soft

A soft-feel DTF print for younger kids’ tees, cured gently to keep the fabric light and wearable.

Kids soft

This DTF Ink sample uses fine TPU powder and a lighter press on a brushed cotton kids’ T-shirt. The print stays flexible and comfortable, with colours that hold up to playground action.

The sample uses brushed cotton for comfort

We pressed this sample on a short-sleeve kids’ T-shirt made from soft brushed cotton, perfect for sensitive younger skin. The design is full CMYK with a solid white underbase, scaled down for smaller sizes. You can see the even coverage and low-profile finish, with the print flexing smoothly with the shirt.

For children’s styles, especially ages 2 to 6, we look for a print that feels almost as soft as the original fabric. A fine powder and precise cure keep the result light for everyday wear.

Starting points for a gentler DTF press on kids’ garments

We printed on double-matte PET film using DTF Ink CMYK plus white ink, shaking the white well before loading. After printing, we applied a fine soft-hand TPU powder and cured the film in an oven at 110 degrees C for 2.5 minutes. For pressing, we used 145 degrees C for 10 seconds at medium pressure, just enough to bond the transfer without stiffening the cotton. Finish with a 7-second press through a Teflon sheet.

Every press and powder is a bit different, so always test your setup before doing a run for real jobs. Younger sizes benefit from slightly reduced heat or time, which keeps the fabric’s hand gentler than on adult sizes.

  • Pre-press for 2 seconds to remove moisture
  • Let the transfer cool fully before a slow cold peel
  • Finish with a Teflon sheet for extra softness

What to check for a soft kids’ transfer

If you want a similar result, check the print feel after cooling. It should flex easily and not show any hard edges. Watch for over-cure, which can stiffen light cotton T-shirts and feel scratchy to kids.

For very pale or pastel shirts, test the white underbase for even coverage without thick build-up. If the powder feels grainy or the print is patchy, review your powdering and curing steps. Run a wash test on a sample to confirm the print stays put and the shirt stays soft after laundry day.

  • Always agitate white ink before printing
  • Check for cold spots on the heat press with an infrared thermometer
  • Store powder and film sealed and dry, away from direct sun

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.