Pressed sample

Lab peel

A benchmark DTF transfer from the Meadowdale lab, pressed and peeled on a basic cotton tee.

Lab peel

This is the first successful lab peel from the DTF Ink Meadowdale bench, showing clean white coverage and sharp CMYK detail. The result demonstrates our baseline DTF process on everyday cotton with a soft-hand powder and standard hot peel PET film.

What this transfer sample demonstrates

This transfer sample was pressed onto a mid-weight, ring-spun cotton t-shirt using DTF Ink’s standard hot peel PET film and fine soft-hand TPU powder. The design features high-density white underbase with vivid CMYK colour, including fine text and gradient detail. The result highlights the balance between strong opacity and a flexible, smooth hand feel, suitable for branded tees or everyday fashion prints.

The clear edge definition on this tee shows good film-to-fabric release and adherence without halo or lift, which is essential for customers needing retail-quality finish on cotton.

How the transfer was made in the Meadowdale lab

Print was done with daily-agitated white DTF ink and a fresh nozzle check. After printing a mirrored design onto A3 hot peel PET film, the wet print was powdered by hand with our fine TPU powder, ensuring even coverage and shaking off excess.

Curing was under a hover press, 5 mm gap, at 145 degrees C for 4 minutes until the surface looked glossy with a fine orange-peel texture. The tee was pre-pressed for 3 seconds, then the transfer pressed at 160 degrees C for 13 seconds at medium-firm pressure. The film was peeled hot in a smooth motion about 5 seconds after opening the press. A final 8-second press through a Teflon sheet finished the surface.

  • White ink agitated and checked
  • Fine powder, even coverage
  • Hover cure: 145 degrees C, 4 minutes
  • Press: 160 degrees C, 13 seconds, medium-firm
  • Hot peel, finish press through Teflon

How to match this result in your own production

Start by confirming your white ink is well-agitated and your printer is running clean. Use a fine TPU powder for smooth, soft results on cotton, and always powder evenly and shake off the excess. If your powder clumps or the print feels gritty, check your humidity and sift the powder.

If you see patchy white after pressing, run a nozzle check and white circulation. For best results, test your own press at 160 degrees C for 10 to 15 seconds and adjust based on fabric thickness and press calibration. Always finish with a short Teflon press for durability.

Let the transfer cool briefly but peel within 10 seconds for hot peel films. If you get any lift, re-press with a Teflon sheet for 5 seconds. Wash test a sample at care label temperature before large runs.

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.