Pressed sample
Soft hand tee
This sample shows a lightweight fashion tee pressed with a DTF Ink soft-hand TPU powder for a premium, flexible print.

The print has a smooth touch and drapes naturally, with no heavy patch feel. Our lab used fine-grade melt powder to keep the handle soft, perfect for retail tees.
A light touch print for retail feel
The pressed sample is a modern-cut, midweight cotton tee ideal for boutique fashion or merch drops where garment feel is as important as colour and stretch. The chosen transfer design includes fine, overlapping lines and open spaces, highlighting how thin DTF layers can blend into high-quality combed cotton. There is no thick patch or stiff edge: the print moves with the fabric, keeping the tee comfortable in summer and easy to wear layered.
The soft result is especially popular for music merch, event shirts and private label fashion brands who want a print that looks professional but still feels like the original garment.
- Lightweight premium cotton tee
- Fine detail and open areas in the design
- Soft-melt TPU powder for a flexible finish
How this soft-hand print was produced
The DTF Ink Meadowdale team used a fine-grade TPU powder for this transfer, chosen for its softer feel on lighter garments. PET transfer film in A3 sheets (double-matte hot peel) was printed with water-based pigment inks, running a daily white agitation and start-of-shift nozzle check to keep the underbase crisp.
Powder was applied by hand in a dust hood, using gloves and a dust mask, and excess was shaken off thoroughly. The film was cured in an oven at 110 degrees C for about 2 minutes until it showed a smooth, slightly glossy orange-peel texture. The garment was pre-pressed for 3 seconds to remove moisture, then the transfer was applied at 155 degrees C for 12 seconds at medium pressure. Peel was done hot, a few seconds after pressing, and a short 7-second finishing press through a Teflon sheet set the print.
- Fine-melt powder for softest handle
- 110 degrees C oven cure for 2 minutes
- 155 degrees C press, 12 seconds, hot peel
Tips to achieve the same soft feel
For a soft result on tees, always choose the finest TPU melt powder in the range: this holds detail and keeps the transfer flexible, especially on lighter or combed cottons. Store powder tightly sealed between uses to avoid clumping, and shake the container before dispensing. Keep humidity in your print room within the recommended 45 to 60 percent range for clean prints and easy powdering.
If your prints are coming out stiff or the powder is not fully melting, check that your oven or press is reaching the target temperature using an infrared thermometer. Avoid over-cure, as this can harden the transfer. Always test a wash on a spare tee and inspect the edge feel and integrity before starting a run.
- Use fine powder for softest results
- Check oven and press temperatures
- Keep print room humidity stable
- Test-wash a sample before a big order
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

