Pressed sample
Tote print
A durable graphic pressed onto a natural canvas tote, using DTF Ink grip melt powder for extra hold.

This sample shows a detailed DTF print on a heavy canvas shopper. Grip melt adhesive gives bite and durability for everyday use.
Grip melt test on 320 gsm canvas tote
Canvas totes are popular for promotions, shopping, and merch, but their thick, uneven weave challenges most transfer methods. This tote is made of 320 gsm natural cotton canvas with pronounced texture. We chose it to show how DTF, paired with a coarse workwear-grade powder, can stick reliably and feel right, even on heavy fabrics.
The print is a two-colour varsity-style graphic with fine edges and tight registration. The job needed a transfer that would not flake when flexed, or wash off after a few runs through the laundry, as these bags take rough use.
Settings and steps for DTF on canvas with grip melt
The artwork was printed in mirror on double-matte cold peel PET film, using DTF Ink CMYK+W inks. The white underbase layer was checked for even coverage by running a nozzle test before starting. The coarse workwear grip melt powder was applied by hand with gloves and a dust mask, shaken to remove excess.
Powder was cured in an oven at 110 degrees C for 3 minutes, producing a fine orange-peel gloss. The tote was pre-pressed for 5 seconds at 160 degrees C to flatten seams and drive off moisture. Transfer pressing was done at 160 degrees C for 15 seconds, medium-firm pressure. After letting the print cool for 90 seconds, we peeled the film low and slow, then finished with a 10 second press under a Teflon sheet.
- 320 gsm cotton canvas tote
- Double-matte cold peel PET film
- Grip melt TPU workwear powder
- Pre-press, then press at 160 degrees C for 15 seconds
- Cold peel, finish with Teflon press
Tips for strong, reliable DTF prints on heavy canvas
For thick weaves, always choose a coarse or workwear-grade powder for better penetration and hold. Pre-pressing the tote is key, canvas holds moisture and can cause bubbling if not flattened and dried first. Make sure your powder is fully cured: under-cured adhesive will feel tacky or wash out quickly.
Test your press pressure and temperature with a small offcut first, as some canvas bags have surface treatments or recycled fibres that change how they react to heat. After the finishing press, check the edges and corners for lift. Store finished totes flat for a few hours before stacking or packing.
- Use grip melt powder for canvas and workwear
- Always agitate white ink before printing
- Pre-press to drive off moisture
- Peel cold and finish with Teflon for durability
- Check for edge lift before shipping
Keep reading
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

