Bellville
Bellville badges
For a batch of staff name badges on dark polos in Bellville, clear, crisp small type made the difference.

Small white staff names on dark workwear polos needed high contrast and clean detail. The decorator used our A3 film sheets and RIP Colour Pack to get it right from the first run.
Getting sharp small type for dark polos
The decorator in Bellville wanted to print individual name badges straight onto navy staff polos for a corporate client. The challenge was the small white type for staff names, especially on stretchy dark polyester. It had to read clearly and stay soft and durable through daily wear. The shop was used to screen printing larger logos, but this time each garment was different and the type size was well under a centimetre tall, so DTF was the right call.
Tiny text can go fuzzy or thick if the white underbase and colour channel aren’t lined up or if the powder melts too far. The shop needed a press routine that would keep the detail clean and the lettering crisp against the dark fabric without risking dye migration.
Using A3 film and RIP for cleaner small type
We supplied A3 cold-peel PET film sheets for easy handling and our RIP Colour Pack with ICC starting points for sharper detail on small text. The print lab agitated the white ink bottle and ran a nozzle check at the start of each shift, then dialled in the underbase in the RIP software to a thinner layer than usual, just enough to keep the lettering opaque but not so thick it would bleed.
For powdering, the team used a fine TPU grade for a soft feel and less bulk under the name. Curing was done in an oven at 110 degrees for about 3 minutes until the powder just turned glossy, checking the finish with a magnifier to spot any graininess. Pressing was at 135 degrees for 12 seconds, cold peel, then a short 8-second finishing press through a Teflon sheet for a smooth hand.
- A3 cold-peel PET film sheets for small runs
- RIP pack with basic ICC profiles
- Daily white ink agitation and nozzle checks
- Fine TPU powder for a smoother finish
What the shop kept doing and what we would tweak next time
After this run, the decorators kept the same print and press settings for all their small-text jobs on dark polos and tees, with a standing routine to check white separation in the ink lines. Their team now stores all film flat in dry drawers and keeps a hygrometer up in the print area to watch Gauteng’s swings in humidity.
Next time, we would suggest testing the black powder variant if they get requests for red or bottle-green garments, as it gives extra assurance against dye migration. For larger runs, it’s worth batching names in the RIP to optimise film use and save time on powdering. With staff badges, take time over the pre-press. A proper flatten and moisture drive-out makes a visible difference in edge sharpness.
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.



