Bloemfontein

Bloemfontein school kits

A Bloemfontein print team used DTF Ink for accurate school crest colour matching on a large kit order.

Bloemfontein school kits

Matching the embroidered crest shades across a full school kit order needed careful print tuning and a harder-wearing powder for durability. Finishing and wash checks ensured the results held up through term after term.

Managing crest colour consistency for a school kit order

A print room in Bloemfontein was tasked with producing a full run of school kits, including shirts, tracksuits and sports bags, all featuring the same multi-colour embroidered crest. The school committee wanted printed crests to match the traditional thread colours as closely as possible, and the garments had to stand up to rough handling in school conditions.

This meant dialling in precise colour settings and making sure the transfers could last through school terms, washes and plenty of wear. The shop had some experience with DTF but was stepping up to a larger batch with stricter colour expectations and a higher bar for durability.

Switching to CMYK plus white and workwear powder for durability

Our team supplied DTF Ink CMYK+White Pro ink sets for the job, with advice on matching the specific reds, golds and navy shades in the crest using custom print profiles. We suggested a daily white circulation cycle and regular nozzle checks at the start of every shift, especially as the dry Free State air can make white ink settle and clog faster.

For the transfers, we recommended our workwear-grade powder to give a slightly tougher bond on polycotton and heavier tracksuit fabrics. This powder is a bit coarser, so we walked the team through adjusting the powdering routine to shake off excess thoroughly, then checked dwell time and temperature in their tunnel dryer. They settled on a 3 minute cure at 120 degrees C after test strips came out with the right glossy orange-peel finish.

Finishing presses were set for 10 seconds at medium-firm to lock down the crests without flattening texture. Each batch was wash tested inside out at the garment’s care-label temperature before delivery.

  • Used custom colour profiles to match crest embroidery
  • Ran white ink agitation cycle daily
  • Switched to workwear powder and tuned cure time
  • Checked every batch with wash and peel tests

Routine improvements for future school orders

After the first order, the shop made sample prints and colour charts a regular part of quoting new school jobs, including a signed-off peel and wash test from the committee. They kept the workwear powder standard for all school kits and now store film sealed in flat packs to keep humidity stable.

Next time, we’d recommend a short test run on each new uniform batch, especially if fabric weight or supplier changes. Sampling and sign-off up front saves rework on big orders, and regular humidity checks in the print room help prevent static-related powder issues during winter.

  • Include colour-matched samples with every quote
  • Make wash testing part of the approval process
  • Keep workwear powder as standard for kits
  • Monitor print room humidity for stable results

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.