Germiston

Meadowdale open day

When our Meadowdale lab hosted an open day, we gave garment decorators a hands-on look at DTF peels and powder windows using our practical press consumables and Cure Check Kits.

Meadowdale open day

Visitors from print shops and home businesses joined us at Bay 12 for live transfer demos. We focused on common powder and curing challenges most printers face.

The open day needed real-world DTF demonstrations

The Meadowdale print lab is where our team tests inks, films and powders under typical Highveld conditions. For the open day, we wanted garment decorators and print shop owners to watch powdering, curing, pressing and peeling up close at the bench.

Many visitors were dealing with unpredictable peels, patchy transfers, and powder that either clumped or failed to hold detail. The brief was to set up repeatable demos covering both hot-peel and cold-peel film, and to have every visitor powder and peel at least one transfer themselves.

We set up powder and press stations with our test kits

We supplied our Cure Check Kits, pre-cut test strips and sample sheets, for visitors to trial different curing times and powder grades side by side. Our press path counter had lint-free wipes, cover papers, and rolls of Teflon sheet, so every transfer started on a fresh surface and ended with a clean finishing press.

We set the powder windows with both fine and workwear-grade adhesive, demonstrating how a 4 to 7 mm press hover at 145 degrees C for around 4 minutes gave a glossy, correctly cured finish. The open day routine included running white agitation cycles on the printer every hour, checking the platen surface temperatures with infrared thermometers, and comparing peel results with visitors. This hands-on approach helped everyone spot the difference between under-cured (tacky, poor wash), over-cured (yellowed, stiff), and just right (smooth with a fine orange-peel gloss).

  • Live powdering with gloves and dust masks
  • Side-by-side hot and cold peel comparisons
  • Cure check under real shop humidity and temperature
  • Finishing press tips for durability

What stayed in the workflow and what we would change

After the open day, most visitors kept using the Cure Check Kit as a quick routine before big runs, and made a habit of checking platen temperature and humidity every morning. The press path consumables, especially Teflon sheets and wipes, became standard kit in several shops.

If we ran the event again, we would add a troubleshooting board for common nozzle check patterns and introduce a quick demo of pre-pressing technique on synthetics at lower temperatures. A few participants asked for a session on black powder for dye-blocking polyesters, so we would work that in as a live test next time.

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.