Sea Point

Sea Point fashion

A Sea Point boutique needed soft transfers for light summer tees, aiming for a high street rail finish with a soft touch and crisp detail.

Sea Point fashion

A fashion shop wanted boutique-quality DTF prints on lightweight cotton tees. We helped them fine-tune for a soft hand and reliable transfer, using our fine-particle powder and double-matte PET film.

Meeting the need for fashion-quality softness

The Sea Point team asked us for DTF prints that could stand out in a boutique setting, with a finish soft enough for hangers and picky shoppers. Their challenge was combining matte pastel colours with a gentle feel on fine, pale cotton. They were already seeing some coarser transfers on test tees and wanted to avoid any thick or shiny patch.

The brief was clear: keep the hand-feel as close as possible to the fabric, even on larger prints, and make sure the edge detail stayed sharp without cracking or curling after a couple of washes.

  • Boutique rail presentation for summer stock
  • Light and soft handle on cotton
  • Pastel and neutral colour palette

Switching powder and routine for a soft result

Our team recommended switching fully to the Powder Soft Hand for all light tees and running Film PET 100, a double-matte sheet, for smoother release. The operators set the powder by hand in a tray, using gloves and a dust mask for safety, and shook off excess thoroughly to prevent any residue.

For curing, the powder went under a hover press at about 145 degrees C, 4 to 5 minutes, just until the powder turned glossy with a faint orange-peel look. Pressing was at 155 degrees C for 12 seconds, always with a short pre-press to flatten and dry the tee. Peeling happened hot, within five seconds of lifting the press, which kept the finish smooth and the print flush to the cotton.

They kept a hygrometer in the print room, aiming for 50 percent relative humidity to keep static and powder flow stable. Each print batch started with a nozzle check and a white ink circulation cycle, so no weak whites made it into stock.

  • Powder Soft Hand for minimal texture
  • Double-matte PET film for clean release
  • Hot peel for smooth finish
  • Hover-press cure for even gloss
  • Daily white agitation and nozzle checks

Long-term outcomes and future tweaks

With the new process, the shop found their tees felt natural on the rail, with clean separation from the PET film and none of the thick patch that had worried them. They’ve stuck to daily white ink agitation and regular humidity checks, especially through the coastal summer.

For future runs, they’re looking at sampling even shorter press times on certain slub jerseys, and we’ve suggested a finishing press through parchment for a bit more matte feel. If they scale up, we’d recommend testing a continuous powdering machine to keep up with volume while protecting that soft hand on every shirt.

  • Ongoing humidity and white ink checks
  • Sampling shorter press times for textured knits
  • Considering semi-auto powdering for larger runs

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.