Soweto

Soweto club kits

Local print crew in Soweto updated club kits with crisp, durable crests using DTF Ink Pro inks and workwear powder.

Soweto club kits

Supplying a Soweto kit printer with CMYK+White Pro and workwear powder, our team helped improve crest quality and wash durability on seasonal club kits. The new routine focused on stable whites, tougher powder and consistent press checks for ongoing success.

The shop wanted sharp crests that would last through the season

A mid-size print bay in Soweto took on a tight run of local club kits in time for the winter fixtures. The main issue was that previous crests had faded out or lost detail after a couple of washes, especially on the backs and sleeves where friction is highest. The shop was already running a compact DTF setup with a basic powder station and a single press, but needed better results for these repeat teams.

The request was clear: seasonal crests that would stick, resist scuffing, and hold their colours on midweight technical kit fabrics. The shop needed a routine that could handle team deadlines without falling behind, while keeping rejects and reprints to a minimum.

We supplied Pro inks and workwear powder with tweaks to the daily setup

Our team supplied CMYK+White Pro ink sets and the workwear-grade hot-melt powder, plus a session in the Meadowdale lab to dial in the right press cycle for their kit fabrics. The white ink underbase was top of the checklist. They switched to daily white agitation and ran a nozzle check every morning, catching weak jets before starting a run. The workwear powder, which is slightly coarser, helped the crests bite into the polyester and polycotton blends.

Press settings started at 155 degrees C for 12 seconds at medium pressure, then a cold peel after a minute. A short finishing press under a Teflon sheet evened out the surface and improved feel. The shop kept their print room at about 50 percent humidity using a small humidifier, which cut down on static and helped the powder coat evenly.

  • Daily white ink agitation and nozzle check
  • Workwear powder for extra grip
  • Cold peel after pressing for sharper detail
  • Finishing press to lock in the transfer

Routine checks stayed in place and wash tests became standard

The shop kept the habit of sample pressing and washing before a full batch, fixing minor issues early, before any finished kits needed reprinting. The white ink routine and powder handling stuck, and club feedback was noticeably more positive. The team now logs every press setting and batch result, so next season’s kits are even easier to produce.

If we repeated this project, we’d add a cure check kit to catch under- or over-cured patches before any pressing. We’d also run a few extra humidity checks when the Highveld gets dry, since static can make a mess of powder and film handling.

  • Sample wash-testing is now standard
  • Logs kept for every batch and setting
  • Ready to refine settings for future kits

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.