Umhlanga
Umhlanga totes
A Durban print shop tackled a batch of thick-weave cotton totes for Umhlanga, fine-tuning their melt window and press routine to suit the fabric.

Switching to our soft-hand powder and 75-micron PET film, the team refined their curing and pressing for deep, structured tote bags. The result was a durable, flexible print that passed wash tests and handled the textured weave without cracking.
The challenge of tote bags with heavy cotton weave
The print team was asked to decorate a run of thick, textured cotton totes destined for Umhlanga retailers. These bags had a chunky weave that absorbs heat unevenly, making the usual DTF melt window too narrow and raising the risk of powder sitting in the fabric's grooves or the print cracking on folds.
Standard settings for t-shirts just were not giving a smooth peel or full adhesion, especially around the handles and seams. The shop needed a way to get soft, flexible transfers to anchor deep into the fibre without stiffening the bag or causing dye migration.
Tweaking powder, film and cure for deeper fibres
We supplied our soft-hand TPU powder for a finer, less gritty feel, and our PET 75 double-matte film which holds registration on heavier fabrics. The team switched to the soft-hand grade to help the melted adhesive run further into the thick weave, avoiding the 'patchy' look you sometimes get on these bags.
They ran a longer powder cure, hovering the design under an open press at about 145 degrees C for just over 4 minutes, watching for a glossy yet still flexible finish. The press time was adjusted to 16 seconds at medium-high pressure, with a firm pre-press to flatten the seams and drive out moisture, then a cold peel once the print had settled. A quick finishing press through parchment paper helped smooth the texture further.
- Used soft-hand powder for better drape
- Dialled in longer cure at 145 degrees C
- Pressed at medium-high pressure for 16 seconds
- Cold peel to avoid lifting on thick weave
What the shop kept doing and possible next steps
The print team now keeps a specific press note for their tote batches: a longer pre-press, extra care around seams, and a firm finishing press. They store their powder and film double-sealed with silica in the coastal humidity, and keep a test tote on hand to check adhesion before each run.
If we ran this job again, we would recommend comparing a workwear-grade powder for even more grip on particularly rough cottons, or trialling a hot-peel film to speed up production, provided the weave is flat enough to release cleanly.
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.



