Recipe
Humidity and powder caking
Coastal print rooms face real powder caking before lunch, but you can keep your transfers crisp with a few habits.

Humidity is a nuisance every DTF operator faces, but nowhere does it hit quicker than in a coastal room. Those sticky mornings on the Durban or Gqeberha coast will see powder clumping in trays before the tea trolley rolls by. I’ve spent enough time in both humid and dry print spaces to see how fast things can go wrong, and how you can get ahead of it.
Why powder cakes faster by the sea
Direct-to-film powders, especially the fine soft-hand grades, soak up moisture from the air like a sponge. Coastal humidity, usually well over 60 percent in the mornings, means that even if your PET film stays smooth, your open powder tray starts picking up water. The powder forms lumps, loses its flow, and suddenly you’re flicking pebbles onto your prints instead of a light sprinkle.
The hotter and steamier the weather, the quicker the caking. You’ll see it in Gqeberha, Durban and even Cape Town on a muggy day. Once powder cakes, you can’t recover it by just stirring. You’ll get uneven coverage and transfers that won’t bond cleanly in press.
Practical steps to keep powder dry
First rule: never leave powder trays open longer than you need. Decant only the amount you need for the next round of prints, then seal the bulk stock tight. Use tubs with a screw lid and store them away from windows and doors.
If you’re running a big job, split powder into two or three small trays. Rotate trays every hour: put the cool dry one out, close the sticky one. If you have an old bar fridge in the corner, use it to store tubs overnight and let them come to room temperature before opening to avoid condensation inside the tub.
Keep a clean spoon or scoop for each grade. Don’t double-dip between coarse and fine. Bits of coarse granules will attract moisture and start the caking chain reaction.
- Seal all powder tubs tightly after each use.
- Run a dehumidifier if the room feels sticky by 10am.
- Wipe down counters if condensation forms.
- Store powder away from fabric steaming or kitchen areas.
- Replace powder if it clumps, don’t try to dry it out.
Monitoring your print room and powder
A basic wall hygrometer is worth its weight in ink. Mount it halfway up the wall, not next to a kettle or open door. Aim for 45 to 60 percent relative humidity. Anything over that and you’ll see caking before lunch, especially in summer. If you walk in and your powder tray crusts after a few prints, the humidity is too high.
If you run a humidifier for your printer heads, keep the powder station on the opposite side of the room or set up a small fan blowing across the powder tray. Airflow helps keep powder moving and slows caking.
What to do when powder starts caking
If you notice powder starting to ball up or stick to your spatula, stop and change to a fresh, dry tray. Never try to break clumps by pushing them through a sieve, as moisture is already inside and you’ll just spread it to the next batch.
Wipe the tray clean, refill with dry powder straight from your sealed tub, and keep going. For big rooms, assign one team member to check powder trays every hour on humid days. If powder is badly caked, write it off and clean the tray before putting out more.
If you pressed a transfer and the powder didn’t melt evenly, or you see patchy adhesive, check if the powder felt gritty or clumpy before coating. It’s often the first sign something’s wrong in the room.
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.


