Support

FAQ

Short answers on peel timing, white ink settling, powder grades and film storage for DTF garment decorators.

Answers to common questions about ink, film, powder and peels

DTF ink is a water-based pigment ink set with a white underbase; shake or agitate the white every day or shift to avoid patchy prints, and always run a nozzle check before production.

PET transfer film comes in rolls or sheets, in hot-peel or cold-peel finishes, store it flat or hanging, dry and out of direct sun to avoid static and dust contamination.

TPU powder is either fine for soft-hand prints or coarser for tougher workwear; always wear gloves and a dust mask when powdering by hand, and shake off the excess so you don’t get powdery edges.

Hot peel means peeling the film off while it’s still warm, in one smooth movement; cold peel means letting the print cool fully before peeling low and slow, always check which film you have and test before a big job.

What we need from you to help with ink, film or powder issues

To give you reliable advice or sort out a possible product issue, we’ll need some details and a sample from you.

  • Which ink, film or powder batch you’re using (found on the packaging)
  • A clear photo or short video of the problem (nozzle check, cured print, peel result, etc)
  • Printer model and RIP, plus your curing and pressing settings
  • A brief description of your process (humidifier, curing oven, hand-powdering or auto-powder, etc)
  • When and where you bought the item

After your DTF question reaches the lab

A DTF Ink team member from the Meadowdale lab or your closest studio will contact you to help troubleshoot your issue or confirm what to do next.

We may ask for more info or a sample for testing, or offer advice you can try straight away. If there’s a clear product fault and you are within the original warranty or return period, your rights under the Consumer Protection Act apply and we will organise a solution that fits the situation.

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.