Starter Bay Bundle
Using Starter Bay Bundle
The Starter Bay Bundle is designed for a clear DTF workflow, guiding you step by step from print to finished transfer.

The step-by-step DTF workflow with the Starter Bay Bundle
Start each day by agitating the white ink bottle and running a nozzle check to ensure all heads are firing, as white pigment tends to settle overnight. Print your artwork in mirror onto the PET film, ensuring the white underbase prints solidly underneath the colour. Dust the print with TPU powder, using gloves and a mask, and shake off excess. Cure the powdered print in an oven or under a hover press, then transfer onto your garment using the recommended press settings for the fabric.
Use the included cure check and press test cards to verify your oven or press is reaching the proper temperature, especially after any power cut or equipment move. This helps catch heat inconsistencies and stops under-cure or over-cure before you run garments.
Typical starting points for South African print rooms
Here are starting settings for common fabrics and press setups. Always adjust based on your actual gear and confirm with a test card before full runs.
• Cure powder: 2 to 3 minutes at 100 to 120 degrees C in oven, or 3 to 5 minutes at 140 to 150 degrees C hovering under press (4 to 7 mm gap)
• Press cotton: 150 to 165 degrees C, 10 to 15 seconds, medium-firm pressure
• Press polyester: 125 to 140 degrees C, 10 to 15 seconds, cold peel for best results
• Use a finishing press (Teflon sheet, 5 to 10 seconds) for durability
Typical mistakes and how the bundle helps
Skipping daily agitation of white ink or missing a nozzle check can cause patchy prints. The test cards reveal weak white or uneven heat so you can fix it before garments are wasted. Under-cured powder will feel tacky and may wash off, while over-cured powder becomes yellow or stiff, both show up clearly on the check cards.
Forgotten powder on the print edges, or using the wrong peel method for your film/fabric, can ruin a run. The quick guide in the bundle lists all common issues and what to check first.
- Always check nozzle and film first
- Test cards catch most setup errors
- Match peel type to film and fabric
Related press workflows and recipes
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

