White Only Top-up

Using White Only Top-up

White Only Top-up keeps your underbase strong through long runs.

White Only Top-up

Topping up the white underbase in your workflow

When the white ink warning flashes or nozzle checks show weak underbase, pause production, check for clogs, and refill just the white lane with White Only Top-up. Agitate the bottle, pour carefully, then run a short circulation cycle (if your printer allows) or gently stir the tank. Always run a nozzle check before starting prints again. This keeps the underbase strong for dark and mid-tone garments, and avoids waste.

  • Wipe the cap thread before resealing
  • Agitate before pouring
  • Run nozzle check after refill
  • Resume printing with strong underbase

Starting points for settings and handling

For best results with this white, keep print room humidity at 45 to 60 percent and room temperature around 20 to 25 degrees C. After topping up, most DTF printers like a quick white circulation or 1 to 2 head cleans. Always powder, cure and press as normal: powder at 100 to 120 degrees C for 2 to 3 minutes, or hover under a heat press at 140 to 150 degrees C for 3 to 5 minutes. Press cotton at 150 to 165 degrees C for 10 to 15 seconds, or polyester lower, and finish with a 5 to 10 second press under Teflon.

  • Humidity: 45 to 60 percent
  • Temp: 20 to 25 degrees C
  • Cure: powder at 100 to 120 degrees C
  • Press: 150 to 165 degrees C (cotton)

Mistakes we see with white ink refills

The most common problem is forgetting to agitate the bottle, which means settled pigment and weak, patchy whites. Another is skipping the nozzle check, since tiny clogs only show up once ink hits the fabric. Sometimes busy printers top up in a rush and spill, or forget to reseal unused white, leading to clumping and waste.

If you get streaks after a refill, stop to clean the capping station and damp-wipe nozzles with a DTF Ink lint-free wipe. Weak prints? Check if the tank looks milky and not settled at the bottom. Keep powder and film away from open ink bottles.

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.