Press Path Consumables
Using Press Path Consumables
The right press path setup keeps your transfers crisp and your press clean from job one.

How Press Path Consumables fit into the DTF workflow
Once your DTF transfer is printed, powdered and cured, Press Path Consumables come into play at the heat press stage. Before loading a garment, place a clean Teflon sheet over the lower platen to stop any adhesive or powder residue from transferring to the press. Cover paper or a second Teflon sheet over the film keeps the design protected during pressing. After pressing, use a lint-free wipe to clean down any stray flecks or fibres.
Wipes are also perfect for quickly cleaning the platen in between jobs, especially if you’re switching from workwear to fashion pieces.
Typical starting settings for best pressing results
Every print room is different, but here are practical starting points when using Press Path Consumables:
- Pre-press garment 2 to 5 seconds
- Cotton: 150 to 165°C for 10 to 15 seconds
- Polyester: 125 to 140°C, usually cold peel
- Medium-firm pressure for most garments
- Finish with 5 to 10 seconds through Teflon
Common mistakes and how to avoid them
We see shops run into problems when they reuse dirty Teflon sheets or skip cleaning platens. Any stray powder, lint or stuck film on the press path can cause ghosting, faded patches or even bond transfers to the Teflon itself.
Another common slip is using old kitchen baking paper or waxed wraps instead of proper press cover sheets, which can transfer oils or melt. Always check your press-side consumables for damage or build-up before every run.
Related press workflows and recipes
Customer reviews
What our DTF Ink customers say
Verified Google reviews
Talk to DTF Ink
Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.

