CMYK+White Compact

Using CMYK+White Compact

This set lets you run reliable DTF prints in starter or sample bays.

CMYK+White Compact

Using CMYK+White Compact ink step by step

Start each print session by shaking the white ink bottle thoroughly, white settles quickly in smaller volumes. Pour the required inks into your DTF printer’s tanks, then run a nozzle check, especially on white. Print your design onto DTF Ink PET film, then transfer to a clean powder bay where you’ll apply a TPU powder, shake off the excess, and cure the transfer.

Once cured, press onto your prepared garment, peel the film (hot or cold, depending on your chosen film), and finish with a short final press for the best feel. Compact sets are forgiving for bay start-ups because less ink sits unused, and any issues are easier to spot early.

Typical starting settings to test in your bay

Every DTF press is different, but these are practical starting points for Compact ink:

White ink: shake hard before each shift

Print room: 45 to 60 percent humidity, 20 to 25 degrees C

Cure: 120 degrees C for 2 to 3 minutes (oven) or 140 to 150 degrees C for 3 to 5 minutes (hovering press)

Cotton blanks: 150 to 165 degrees C at medium pressure, and most Compact prints set within 10 to 15 seconds

Polyester: 125 to 140 degrees C, 10 seconds, cold peel

Peel: stick to the film and powder maker’s notes

  • Shake white every shift
  • Check nozzle pattern before production
  • Store ink bottles capped and upright

Common DTF print faults and how to prevent them

A common issue is weak or streaky white, especially if the bottle hasn’t been agitated or the machine didn’t run a white circulation. Another is running out of colour mid-job, keep a spare Compact set on hand for urgent reprints, but don’t top up with old ink. In dry air, nozzles can clog, so pause and humidify the space if you see banding.

If you’re testing new garment types, always press a sample and wash it in line with the care label before running a full order. This helps you spot any edge lift or powder wash-off early. For small bays, work on one colour at a time if you’re changing over often.

Customer reviews

What our DTF Ink customers say

Verified Google reviews

Talk to DTF Ink

Tell us about your printer, film, powder and press settings and our team will help you get repeatable transfers. Meadowdale lab in Germiston, plus seven studios.